More breakage

While shopping yesterday, I discovered that my CB-3000 broke yet again.  This will be my second repair of the device in the 9 days we’ve been using it 24×7.  My wife doesn’t like me having to be unlocked to repair it – being unsupervised in my workshop.  And I am frustrated at how much maintenance this thing is taking.

To be fair, this plastic chastity unit is over 5 years old, it has some mileage on it, and it was low-cost.  Prior problems have included splitting on the side at the seam, cracking of the base ring at the hinge, and the two plastic posts coming out.  The seam splitting was the worst.  When I swelled up, the cage would come apart there, and the thin skin on the shaft of my cock would get caught in the crack.  The pinching that resulted not only hurt terribly, but bled a little and took days to heal.  I tried several methods to glue it, and none held for long.  Eventually I cleaned the hell out of it and then was generous with some superglue.  Thankfully that’s been holding.

When the two original plastic pins started pulling out, I replaced them with some just-right sized steel pins I had laying around my workshop.  I had to increase the sizes of the pin-related holes just a little bit, including in the base rings.  But that was the easy part.  Gluing the pins so they would stay proved less easy.  I figured JB Weld would last forever, but that’s what gave out yesterday.  Probably not enough surface area, or inadequate cleaning before gluing, caused the failure.  Those pins take a lot of force when I swell up, and that back-and-forth pressure could have loosened them too.

Fortunately again, superglue seems to be holding.  But between my frustration and my wife’s disappointment, it seems like it may be time for a chastity device upgrade.  I suggested to her that we consider a new one, and she sounded in favor of it.  About a year ago I put together a slide show for her illustrating how 30 different chastity devices looked.  The visual aspect was most important to her, so seeing actual cocks locked in actual cages helped.  Unfortunately nothing stood out as a winner.

We have the typical chastity conundrum: how to balance security, aesthetics, wearability, security, and cost.  I’m going to add cleanliness to the list, as I’ve really noticed that it’s hard to keep my CB-3000 clean.  To be blunt, tiny starts to smell pretty bad after only a couple of days.  One option is to go through an unlocking ritual that often, but it would be ideal to be able to stay clean while remaining locked.

I’m going to look on-line and propose something to her.  With any luck, santa will bring be a new cock cage to prevent me from having any orgasms.

Leave a comment

No comments yet.

Comments RSS TrackBack Identifier URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s